Showing posts with label Mead. Show all posts
Showing posts with label Mead. Show all posts

Sunday, January 16, 2011

Homebrew Series 1 - Making Mead - Part 5 - Bottling and Labeling

Part 5 - Bottling and Labeling
So, after my failed attempt at racking the mead to remove the yeast from the bottom of the jug, I decided to take a different approach and bottle the mead into 12 oz. beer bottles. Starting with 8 bottles, not enough to use all the mead, I saved some to drink and a bit of waste to avoid bottling tons of yeast as well.
I used a sanitized plastic hose to siphon the mead from the jug to the bottles. I started the hose with some water which I poured into the glass seen in the picture above. This is an easy, much more sanitary, way to begin a siphon. Alternately, using a solution of no-rinse sanitizer and water to start the siphon is cleaner yet. 
As the jug started getting closer to the bottom I was careful to keep the hose hovering just above the sediment in an effort to leave as much behind as possible. These are also crucial moment. As the jug begins to empty, it is much more difficult to restart the siphon because of the vertical distance that the mead has to travel to begin a continuous flow.
After all of the bottles are filled to about mid-way through the neck, its time to cap them. This nifty contraption is used to crimp the edges of the cap on top of the bottle creating the seal.

After capping all of the bottles I decided to use some of the 'Hello my name is' name tags that I've had laying around since Halloween to label the bottles.
Once they were all done they went back to the refrigerator for future enjoyment. Now I'll just have to find out what professional mead tastes like and if my homebrew attempt at it was indeed as successful as I think it has been.

Keep an eye out for future homebrew series here at Musings on Beer. It's been quite a while since I last attempted to brew beer, so maybe I'll get a new project going soon.

See the other parts in the series:

Saturday, January 15, 2011

Homebrew Series 1 - Making Mead - Part 4 - Final Racking

Part 3 - Final Racking

After a few weeks of fermenting away in my refrigerator, my mead is actually mead. I originally planned to leave the finished mead in a jug, so I decided to rack the mead one more time to remove some of the yeast sediment from the mead.
 I poured the mead through the funnel again, which has a fine mesh screen in it. I had naïvely hoped that this would catch a majority of the yeast, but it didn't, what I ended up with was essentially all of the sediment mixed in with the final batch. In the future, if I decide to try to filter out yeast from mead (or beer) I might opt for several layers of cheesecloth instead of the screen.
Before shaking up all of the yeast on the last rack, I poured myself a small sample to try. Unfortunately, I don't have much to go on for comparing this mead to the professional stuff.

For now, though, I know that this honey wine is quite sweet, but not cloying. The spices that I added in the original boil come through quite clearly. The cinnamon as well as the cardamom seem to be most prevalent. There's a minor citrus note from the lemon zest and an interesting waxy honey-comb like essence near the finish. I'd say its certainly enjoyable and there's nothing about it that I see as off-putting. So, at this point I'd say my experiment in mead-making was a success. I also think any future attempts will benefit from the experience I gained this time around.

Stay tuned for one last installment of this series, where I bottle up the mead and label it.

See the other parts in the series:
Part 1 - Mixing the Ingredients
Part 2 - Pitching the Yeast, Beginning Fermentation
Part 3 - Racking the Mixture
Part 5 - Bottling and Labeling

Saturday, December 11, 2010

Homebrew Series 1 - Making Mead - Part 3 - Racking the Mixture



Homebrew Series 1 - Making Mead
Part 3 - Racking the Mixture
After the yeast has worked some of its magic in the brew pot it was time to move it to a jug to continue fermenting. To do this, I siphoned most of the liquid from the pot using a plastic hose, while making sure to leave as much yeast sediment behind as possible. Unfortunately I was unable to siphon and photograph at the same time.
To the jug I added a few cups of water (boiled and cooled) to reach the neck. Now, the jug is sealed with a rubber stopper and an airlock. The airlock is filled with a liquid (in this case vodka, but water, no-rinse sanitizer, or other similar liquids would do), which allows carbon dioxide (a by-product of fermentation) to escape the jug, without allowing air in.
For the next few days the yeast will continue to work its magic. Once the most vigorous foaming has slowed it will be time to move the jug to the refrigerator. Before then, I’ll have to make some room, I’m not sure there’s even enough space with the shelves in.

See the other parts in the series:
Part 1 - Mixing the Ingredients
Part 2 - Pitching the Yeast, Beginning Fermentation
Part 4 - Final Racking
Part 5 - Bottling and Labeling

Wednesday, December 8, 2010

Homebrew Series 1 - Making Mead - Part 2 - Pitching the Yeast, Beginning Fermentation


Homebrew Series 1 - Making Mead
Part 2 - Pitching the Yeast, Beginning Fermentation
On day two, once the mixture has sufficiently cooled its time to strain the spices and add the yeast to begin fermentation. First, I added the yeast to a small bowl of warm water (about 100°F). This begins to activate the dry yeast and gets them ready to be added to the liquid. Next, I poured the mixture through a large funnel, with a screen, into one of my glass jugs.
This strained out a lot (but not all) of the sediment. A lot more will be created by the yeast.


Although it looks good in the jug, this is only an intermediate step. The liquid got added back to the pot where I next added the yeast.


After two days the yeast will have begun to make some progress. Once this is done, I’ll transfer the liquid (trying to leave as much sediment behind) to one of the glass jugs to begin the bulk of fermentation.

See the other parts in this series:
Part 1 - Mixing the Ingredients
Part 3 - Racking the Mixture
Part 4 - Final Racking
Part 5 - Bottling and Labeling

Tuesday, December 7, 2010

Homebrew Series - Making Mead



Homebrew Series - Making Mead
Part 1 - Mixing the ingredients
This will be a series about my first attempt at making some homemade mead. The process overall should take between three and four weeks. Most of the time is waiting for fermentation to take place, while the first few days have the bulk of the work.
The process seems simple enough and I’ll be using a recipe posted by Elizabeth Scheyder. Mead, for those who may not be familiar with it, is a type of honey wine, often thought to be the first ever fermented beverage. The recipe includes the addition of some spices that technically make this a ‘metheglin,’ but just mead will do.
To help the flavoring process, fresh cinnamon sticks should be lightly cracked. I used a paper towel and a thick pint glass. Very high-tech.
Similarly, the whole cloves (I used four) need to be lightly cracked.
Important to the process is using cleansed utensils. I used a warm light bleach mixture, but other sanitation products could also be used. 
The spices, including lemon zest and cardamom are simmer in 2 quarts of water to add aroma.
After the water is scented an extra quart of water is added with 2 lbs of raw honey.
The mixture is combined fully, the white foam is skimmed off, and the pot is removed from the burner.
The next step is to add yeast, but the mixture needs to cool first. I left the pot overnight, but an ice bath could achieve the same result in much less time.
Tomorrow I’ll show the next steps which include straining the spices and pitching the yeast.


See the other parts in this series:

Advertisement